LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting [Engine Mechanical MZR 1.5] >> Engine Control System Operation Inspection >> Fuel Pump Operation Inspection

Fuel Pump Operation Inspection

  1. Connect the M-MDS to the DLC-2.
  2. Remove the fuel-filler cap.
  3. Switch the ignition to ON.
  4. Turn the fuel pump relay from off to on using the FP PID and inspect if the operation sound is heard. (See ON-BOARD DIAGNOSTIC TEST .)
    • If no operation sounds is heard, proceed to next step.
  5. Measure the voltage at the fuel pump terminal B (wiring harness-side).

Specification 

B+ (Ignition switch is ON position)