LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System [MZR 1.5] >> Fuel Injector Removal/Installation >> Fuel Injector Installation Note

Fuel Injector Installation Note

  1. Apply a small amount of clean oil to a new O-ring.
    CAUTION:
    • A damaged O-ring could cause fuel leakage. Be careful not to damage the O-ring when installing the fuel injector.
    • If there is foreign material on the fuel injector connecting part, it might damage the fuel injector and fuel distributor. To prevent this, clean the connecting part before connecting the fuel injector.
  2. Install the fuel injector straight to the fuel injector port.
  3. Verify that the fuel injector rotates smoothly.
    • If it does not rotate smoothly, reinstall the fuel injector.
Fig 1: Installing Fuel Injector To Fuel Injector Port
G06940647Courtesy of MAZDA MOTORS CORP.