LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Standard >> Repair and Diagnosis >> Engine Mechanical >> Fuel System [MZR 1.5] >> Before Service Precaution >> Fuel Line Safety Procedure

Fuel Line Safety Procedure

  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5] .)
  2. Remove the fuel-filler cap to release the pressure inside the fuel tank.
  3. Remove the fuel pump relay.
  4. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5] .)
  5. Start the engine.
  6. After the engine stalls, crank the engine 2-3 times. 
  7. Switch the ignition to off.
  8. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5] .)
  9. Install the fuel pump relay.
  10. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5] .)
    Fig 1: Identifying Fuel Pump Relay And Fuse Block
    G06940591Courtesy of MAZDA MOTORS CORP.