LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window SUBSWITCH Inspection >> Passenger's Side

Passenger's Side

  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Remove the power window subswitch. (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY .)
  5. Verify that the continuity is as indicated in the table using a tester.
    • If not as indicated in illustration below, replace the power window subswitch.
    Fig 1: Power Window Subswitch Continuity Chart (Passenger Side)
    G06941902Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Power Window Subswitch Circuit With Connector Terminals (Passenger Side)
    G06941903Courtesy of MAZDA MOTORS CORP.