LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Liftgate Lock Actuator Inspection

Liftgate Lock Actuator Inspection

  1. Disconnect the negative battery cable.
  2. Remove the liftgate lower trim. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
  3. Remove the liftgate latch and lock actuator. (See LIFTGATE LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION .)
  4. Press the latch in using a flathead screwdriver to inspect the latch lever condition.
    Fig 1: Pressing Latch Using Flathead Screwdriver
    G06942066Courtesy of MAZDA MOTORS CORP.
  5. Apply battery positive voltage and connect the ground to each terminal, and then verify the operation.
    • If not as indicated in the table, replace the liftgate latch and lock actuator.
    TERMINAL REFERENCE CHART

    Lock actuator operation Terminal
    B+ Ground
    UNLATCH D B
    Fig 2: Applying Battery Positive Voltage And Connect Ground To Each Terminal
    G06942067Courtesy of MAZDA MOTORS CORP.