LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Hood Release Cable Removal/Installation

Hood Release Cable Removal/Installation

  1. Disconnect the negative battery cable. (Vehicle with front fog lights)
  2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  3. Remove the seal board upper. (See SEAL BOARD UPPER REMOVAL/INSTALLATION .)
  4. Remove the hood release lever. (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .)
  5. Remove the hood release cable from clips A.
  6. Remove the clips B.
  7. Disconnect the hood latch from the hood release cable.
  8. Remove the hood release cable from outside of the vehicle.
    Fig 1: Identifying Hood Release Cable, Hood Latch And Clips
    G06942009Courtesy of MAZDA MOTORS CORP.
  9. Install in the reverse order of removal.