LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Hood Latch Switch Inspection

Hood Latch Switch Inspection

  1. Disconnect the negative battery cable.
  2. Remove the hood latch. (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .)
  3. Press the latch in using a flathead screwdriver to inspect the latch lever condition.
    Fig 1: Pressing Latch Using Flathead Screwdriver
    G06942010Courtesy of MAZDA MOTORS CORP.
  4. Verify that the continuity is as indicated in the table.
    • If not as indicated in the table, replace the hood latch.
    Fig 2: Hood Latch Switch Terminal Continuity Chart
    G06942011Courtesy of MAZDA MOTORS CORP.
    Fig 3: Hood Latch Switch Circuit
    G06200887Courtesy of MAZDA MOTORS CORP.