Audio Control Switch Inspection
- Disconnect the negative battery cable and wait for 1 min or more.
- Remove the driver-side air bag module. (See
DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION
.)
- Disconnect the clock spring connector.
- Inspect for resistance and continuity between clock spring connector terminals M-K/I using a tester.
Courtesy of MAZDA MOTORS CORP.
- If not within the specification, replace the audio control switch.
Courtesy of MAZDA MOTORS CORP.
- Apply battery positive voltage to audio control switch terminal G, and connect terminal E to ground.
- Verify that the LED illuminates.
- If the LED does not illuminate, replace the audio control switch.
Courtesy of MAZDA MOTORS CORP.