LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> CX-7 AWD L4-2.3L Turbo >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Camshaft Bearing

Camshaft Bearing

Install the camshaft caps and temporarily tighten the camshaft cap bolts evenly in two or three passes, and then tighten the camshaft cap bolts in two passes, using the following two steps and in the order shown in the figure.






Tightening procedure
5.0-9.0 Nm {51-91 kgf-cm, 45-79 in-lbf}
14.0-17.0 Nm {1.5-1.7 kgf-m, 10.4-12.5 ft-lbf}