LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> CX-7 AWD L4-2.3L Turbo >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Lighting and Horns >> Headlamp Control Module >> Testing and Inspection >> Component Tests and General Diagnostics

Component Tests and General Diagnostics




AUTO LIGHT CONTROL MODULE INSPECTION

1. Measure the voltage at the auto light control module terminals as indicated below.

2. Disconnect the auto light control module connector before inspecting for continuity at terminals 1K, 2A, 2O and 2P.

- If not as specified, inspect the parts listed under "Action."

- If the parts and wiring harnesses are okay but the system still does not work properly, replace the auto light control module.

Terminal Voltage List (Reference)






Terminal Voltage List (Reference) (Part 1):





Terminal Voltage List (Reference) (Part 2):





Terminal Voltage List (Reference) (Part 3):






*
For vehicles with DRL only.