LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2009 >> CX-7 AWD L4-2.3L Turbo >> Repair and Diagnosis >> Heating and Air Conditioning >> Evaporator Temperature Sensor / Switch >> Testing and Inspection

Evaporator Temperature Sensor / Switch: Testing and Inspection




EVAPORATOR TEMPERATURE SENSOR INSPECTION

1. Set the fan speed MAX HI.

2. Set the temperature control at MAX COLD (Turn the left).

3. Turn the A/C switch off.

4. Set the RECIRCULATE mode.

5. Close all doors and windows.

6. Wait for 5 min.

7. Remove the glove compartment. Service and Repair

8. Disconnect the evaporator temperature sensor connector.

9. Measure the temperature at the blower inlet.

10. Measure the resistance between terminals of the evaporator temperature sensor.

- If the resistance is not as shown in the graph, replace the evaporator temperature sensor.