Rear Door Quarter Glass Removal/Installation
- To access the glass installation bolt, position the rear door glass so that the distance from the top of the rear door glass to the upper part of the rear beltline molding is approx. 144 mm {5.67 in}.
Courtesy of MAZDA MOTORS CORP.
- Disconnect the negative battery cable.
- Remove the rear door trim. (See
REAR DOOR TRIM REMOVAL/INSTALLATION
.)
- Remove the screw.
- Remove the hole plug
- Remove the bolt A.
- Remove the bolt B.
- Remove the rear door quarter glass guide.
Courtesy of MAZDA MOTORS CORP.
- Slide the rear door quarter glass in the direction of the arrow (1) shown in the figure.
Courtesy of MAZDA MOTORS CORP.
- Remove the rear door quarter glass and weatherstrip as a single unit in the direction of the arrow (2) shown in the figure.
- Remove the rear door quarter glass from the weatherstrip.
Courtesy of MAZDA MOTORS CORP.
- Install in the reverse order of removal.