LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> 5 Touring, 2.3 3 >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Information Display Removal/Installation

Information Display Removal/Installation

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
  2. Disconnect the negative battery cable.
  3. Remove the following parts:
    1. Side wall (See SIDE WALL REMOVAL/INSTALLATION )
    2. Front console (See FRONT CONSOLE REMOVAL/INSTALLATION )
    3. Center panel module (See CENTER PANEL MODULE REMOVAL/INSTALLATION )
    4. Climate control unit (with car-navigation system) (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER] )
    5. Car-navigation unit (with car-navigation system) (See CENTER PANEL MODULE REMOVAL/INSTALLATION )
    6. Dashboard center panel (See DASHBOARD CENTER PANEL REMOVAL/INSTALLATION )
  4. Remove in the order indicated in the table.
    Fig 1: Identifying Information Display Remove/Install Components
    G05545951Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.