LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Technical Data [Brake System] >> Brake Specifications >> General Specifications

General Specifications

GENERAL SPECIFICATIONS

Item Specification
Brake Disc  
Minimum Brake Disc Thickness 2WD, 4WD (Discard Thickness) 24.5 mm (0.96 inch)
Brake Disc Maximum Runout 0.076 mm (0.003 inch)
Brake Disc Maximum Thickness Variation 0.010 mm (0.0004 inch)
Brake Pads  
Minimum Thickness Above the Metal Backing Plate or Rivets 3.0 mm (0.118 inch)
Minimum Brake Pad Taper Wear (in any direction) 3.0 mm (0.118 inch)
Drum Brake  
Lining Minimum Thickness 0.8 mm (0.03 inch)
Brake Drum Maximum Diameter Molded into the brake drum
Brake Pedal  
Type Suspended
Master Cylinder  
Type Tandem (with level sensor)
Power Brake Unit  
Type Vacuum multiplier, tandem diaphragm
Power Brake Unit Push Rod Length 24.89-25.27 mm (0.980-0.995 inch)
Parking Brake  
Type Mechanical two-rear wheel control
Operation System Pedal
Brake Fluid  
Type DOT 3 Brake Fluid