LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 3 i, 2.0 F, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Cooling System (L3 With TC)) >> Radiator Removal/Installation >> Radiator Removal Note

Radiator Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Tilt the radiator to the engine side.
  2. While lifting the radiator, remove the lower mount rubber (LH) from the mount installation hole.
  3. While lifting the radiator, remove the lower mount rubber (RH) from the mount installation hole.
    Fig 1: Identifying Radiator Parts
    G04954721Courtesy of MAZDA MOTORS CORP.
  4. Remove the condenser from the radiator with the pipes still connected, by pressing the radiator side tab to unlock the tab A on the condenser.
  5. Remove the radiator from below.
    Fig 2: Identifying Radiator Condenser
    G04954722Courtesy of MAZDA MOTORS CORP.