Radiator Drain Plug Replacement
WARNING: This page is about a different variant/trim than selected.
WARNING:
- Never remove the cooling system cap or loosen the radiator drain plug while the engine is running, or when the engine and radiator are hot. Scalding engine coolant and steam may shoot out and cause serious injury. It may also damage the engine and cooling system.
- Turn off the engine and wait until it is cool. Even then, be very careful when removing the cap. Wrap a thick cloth around it and slowly turn it counterclockwise 2.5 turns. Step back while the pressure escapes.
- When you are sure all the pressure is gone, turn the cap using the cloth, and remove it.
- Remove the under cover.
- Drain the engine coolant. (See ENGINE COOLANT REPLACEMENT ).
- Loosen the radiator drain plug completely.
- Using a flathead screwdriver or equivalent, pry out the radiator drain plug.
- Install a new radiator drain plug with a new O-ring.
Tightening torque
1.2-1.5 N.m {13-15 kgf.cm, 11-13 in.lbf}
- Refill the engine coolant. (See ENGINE COOLANT REPLACEMENT ).
- Inspect for engine coolant leakage. (See ENGINE COOLANT LEAKAGE INSPECTION ).
- Install the under cover.