LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 3 i, 2.0 F, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Exhaust System (L3 With TC)) >> Exhaust System Removal/Installation >> Notes

Exhaust System Removal/Installation: Notes

WARNING: This page is about a different variant/trim than selected.
WARNING:
  • A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3 WITH TC] .)
  2. Disconnect the negative battery cable.
  3. Remove the charge air cooler. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION )
  4. Remove in the order indicated in the table.
  5. Install in the reverse order of removal.
    Fig 1: Exhaust System Replacement Components -- With Torque Specification (L3 With TC)
    G04954988Courtesy of MAZDA MOTORS CORP.