LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 3 i, 2.0 F, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Front Seat Removal/Installation

Front Seat Removal/Installation

WARNING:
CAUTION:
  • For vehicles with the two-step deployment air bag system, when the passenger's seat is removed, perform the seat weight sensor inspection using the M-MDS after installing the passenger's seat. (See SEAT WEIGHT SENSOR INSPECTION .)
  • For vehicles with the two-step deployment air bag system, when the passenger's seat is replaced with a new one, perform the seat weight sensor calibration using the M-MDS. (See SEAT WEIGHT SENSOR CALIBRATION .)
  1. Turn the ignition switch to the LOCK position.
  2. Disconnect the negative battery cable and wait for 1 min or more.
  3. Press connector tab A in the direction of the arrow.
    Fig 1: Pressing Connector Tab A In Direction Of Arrow
    G04956796Courtesy of MAZDA MOTORS CORP.
  4. Pull out the connector lock in the direction of the arrow and disconnect the connector.
  5. Remove the seat belt anchor (RH). (See FRONT SEAT BELT REMOVAL/INSTALLATION .)
    Fig 2: Identifying Front Seat Connector
    G04956797Courtesy of MAZDA MOTORS CORP.
  6. Remove the covers.
  7. Remove the bolts, then remove the front seat.
  8. Install in the reverse order of removal.
  9. Perform the weight sensor initialization procedure. (See SEAT WEIGHT SENSOR CALIBRATION .)
    Fig 3: Front Seat Mounting With Torque Specification
    G04956798Courtesy of MAZDA MOTORS CORP.