LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> Tribute i, 4WD, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle >> Output Shaft >> Disassembly

Output Shaft: Disassembly

  1. Prior to disassembly of the main shaft, measure and record end play for first and second gears. See the following chart for standard values.
    Fig 1: Measuring And Recording End Play For First And Second Gears
    G03725615Courtesy of MAZDA MOTORS CORP.
    GEARS END PLAY STANDARD VALUES

    Gear mm in
    1st 0.20 - 0.30 0.007 - 0.011
    2nd 0.06 - 0.16 0.002 - 0.006
  2. Remove the mainshaft rear bearing retainers
    1. Remove the snap ring.
    2. Remove the C-ring holder.
    3. Remove the C-ring.
    Fig 2: Illustration For Step 1-3
    G03725616Courtesy of MAZDA MOTORS CORP.
  3. Using the special tool, remove the main shaft rear bearing.
    Fig 3: Removing Main Shaft Rear Bearing
    G03725617Courtesy of MAZDA MOTORS CORP.
  4. Remove the snap ring.
    Fig 4: Removing Snap Ring
    G03725618Courtesy of MAZDA MOTORS CORP.
  5. Using the special tool, remove 5th main gear and 4th main gear together.
    Fig 5: Removing 5th Main Gear And 4th Main Gear Together
    G03725619Courtesy of MAZDA MOTORS CORP.
  6. Remove 3rd main gear, 2nd main gear, 2nd gear needle bearing, 2nd gear bushing, 1st and 2nd gear synchronizer assembly, 1st main gear, reverse main gear, 1st gear needle bearing and 1st gear bushing together.
    Fig 6: Removing 2nd-3rd Main Gear, 2nd Gear Needle Bearing And Bushing
    G03725620Courtesy of MAZDA MOTORS CORP.