LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> Tribute i, 4WD, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle >> Differential >> Disassembly

Manual Transaxle: Differential: Disassembly

Fig 1: Exploded View Of Differential
G03725652Courtesy of MAZDA MOTORS CORP.
NOTE:
  • Backlash specification: 0.02 - 0.08mm (0.0008 - 0.0031 in).
  1. Using the special tool, measure and record backlash for the differential side gears. Install a new differential if beyond specification.
    Fig 2: Measuring And Recording Backlash For Differential Side Gears
    G03725653Courtesy of MAZDA MOTORS CORP.
  2. Remove the 10 bolts and the ring gear.
  3. Using the special tools, remove the differential side bearing.
    Fig 3: Removing Differential Side Bearing (1 Of 2)
    G03725654Courtesy of MAZDA MOTORS CORP.
  4. Remove the spacer and the VSS drive gear.
  5. Using the special tools, remove the differential side bearing.
    Fig 4: Removing Differential Side Bearing (2 Of 2)
    G03725655Courtesy of MAZDA MOTORS CORP.