LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Protege L4-2.0L DOHC Turbo >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Brake Fluid Level Sensor/Switch >> Testing and Inspection

Brake Fluid Level Sensor/Switch: Testing and Inspection

FLUID LEVEL SENSOR INSPECTION





1. Disconnect the sensor connector.
2. Connect an ohmmeter to the connector.





3. Starting with the fluid level above MIN, verify that there is no continuity.
4. Remove the brake fluid and verify that there is continuity when the level is below MIN.
^ If not as specified, replace the sensor.