LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Power Steering Pump Removal/Installation >> CIII 4.0L Installation

CIII 4.0L Installation

  1. Install the power steering pump.
    1. Install the power steering pump.
    2. Install the bolts.
    Fig 1: Installing Power Steering Pump
    G01924870Courtesy of MAZDA MOTORS CORP.
  2. Connect the power steering fluid reservoir outlet hose to the power steering pump.
    1. Connect the power steering fluid reservoir outlet hose to the power steering pump.
    2. Compress and move the power steering fluid reservoir outlet hose clamp.
    Fig 2: Connecting Power Steering Fluid Reservoir Outlet Hose To Power Steering Pump
    G01924871Courtesy of MAZDA MOTORS CORP.
  3. Using the special tool, install a new seal on the pressure line.
    Fig 3: Installing Seal On Pressure Line
    G01924872Courtesy of MAZDA MOTORS CORP.
  4. Connect the power steering pressure hose to the power steering pump.
    Fig 4: Connecting Power Steering Pressure Hose To Power Steering Pump
    G01924873Courtesy of MAZDA MOTORS CORP.
  5. Connect the power steering return line hose to the power steering fluid reservoir.
    Fig 5: Connecting Power Steering Return Line Hose To Power Steering Fluid Reservoir
    G01924874Courtesy of MAZDA MOTORS CORP.
  6. Install the power steering pump pulley.
    1. Position the power steering pump pulley.
    2. Install the bolts.
    Fig 6: Installing Power Steering Pump Pulley
    G01924875Courtesy of MAZDA MOTORS CORP.
  7. Install the drive belt; see DRIVE BELT REMOVAL/INSTALLATION -- 4.0L .
  8. Tighten the power steering pump pulley bolts.
    Fig 7: Installing Power Steering Pump Pulley Bolts
    G01924876Courtesy of MAZDA MOTORS CORP.
  9. Install the engine cooling fan; see COOLING FAN AND CLUTCH REMOVAL/INSTALLATION - 4.0L .
  10. Fill, purge and leak test the system.