LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Track Front - Bucket And 40 Percent Bench Removal/Installation >> Installation Note:

Installation Note:

WARNING:
  • To reduce the risk of serious personal injury, read and follow warnings, cautions, and notes at the beginning of the removal procedure.

All Vehicles 

  1. Install the inboard recliner and the nut.
    Fig 1: Installing Inboard Recliner and Nut
    G01925946Courtesy of MAZDA MOTORS CORP.
  2. Install the outboard recliner and the nut.
    Fig 2: Installing Outboard Recliner And Nut
    G01925947Courtesy of MAZDA MOTORS CORP.
  3. On supercab vehicles, install the two plastic locks.
    Fig 3: Installing Plastic Locks
    G01925948Courtesy of MAZDA MOTORS CORP.
  4. Install the linkage and latch the plastic locks.
    Fig 4: Installing Linkage And Latching Plastic Locks
    G01925949Courtesy of MAZDA MOTORS CORP.
  5. On all vehicles, install the LH and RH seat tracks as an assembly.
    Fig 5: Installing LH And RH Seat Tracks
    G01925950Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • Only the passenger seat is equipped with a child safety seat tether anchor. The driver seat is equipped with a bracket in place of the child safety seat tether anchor.
    NOTE:
    • Passenger seat shown.
  6. Install the child safety seat tether anchor and the bolts.
    Fig 6: Installing Child Safety Seat Tether Anchor And Bolts
    G01925951Courtesy of MAZDA MOTORS CORP.
  7. Install the seat backrest recliner link cable.
    Fig 7: Installing Seat Backrest Recliner Link Cable
    G01925952Courtesy of MAZDA MOTORS CORP.
  8. Install the seat track adjustment lever.
    • Install one side of the seat track adjustment lever at a time.
    Fig 8: Installing Seat Track Adjustment Lever
    G01925953Courtesy of MAZDA MOTORS CORP.
  9. Install the push nuts.
    Fig 9: Installing Push Nuts
    G01925954Courtesy of MAZDA MOTORS CORP.
  10. Install the spring clip on the recliner handle. Install the recliner handle
    Fig 10: Installing Recliner Handle
    G01925955Courtesy of MAZDA MOTORS CORP.
  11. Install the spring.

    Vehicles Without Safety Belt Buckle Pretensioners 

  12. Restore the vehicle to operating condition.
    1. Install the front seat backrest. See SEAT BACKREST FRONT - 60 PERCENT BENCH REMOVAL/INSTALLATION  or see SEAT BACKREST FRONT - BUCKET AND 40 PERCENT BENCH REMOVAL/INSTALLATION  .
      WARNING:
      • To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the seat removal and installation procedure.
    2. Install the affected seat.

    Vehicles With Safety Belt Buckle Pretensioners 

  13. Restore the vehicle to operating condition.
    1. Install the front seat backrest. See SEAT BACKREST FRONT - 60 PERCENT BENCH REMOVAL/INSTALLATION  or see SEAT BACKREST FRONT - BUCKET AND 40 PERCENT BENCH REMOVAL/INSTALLATION  .
      WARNING:
      • To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the safety belt buckle and pre-tensioner removal and installation procedure.
    2. Install the safety belt buckle and pretensioner. See SEAT BELT BUCKLE AND PRETENSIONER - 60 PERCENT BENCH or see SEAT BELT BUCKLE AND PRETENSIONER - BUCKET AND 40 PERCENT BENCH .
      WARNING:
      • To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the seat removal and installation procedure.
    3. Install the affected seat.
      WARNING:
      • To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or replacing any front or side air bag supplemental restraint system (SRS) components and before servicing, replacing, adjusting or striking components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood latches.

      To deplete the backup power supply energy, disconnect the negative battery cable and wait at least one minute. Be sure to disconnect auxiliary batteries and power supplies (if equipped).

    4. Disconnect the negative battery cable, See BATTERY DISCONNECT .
      WARNING:
      • To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the supplemental restraint system (SRS) deactivation/reactivation procedure.
    5. Reactivate the supplemental restraint system (SRS). See SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEACTIVATION AND ACTIVATION  .
    6. Connect the negative battery cable.
    7. With all restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). See AIR BAG SAFETY PRECAUTIONS .

    All Vehicles 

  14. Check the active restraint system for correct operation. See AIR BAG SAFETY PRECAUTIONS .