DTC P0500: Vehicle Speed Sensor Malfunction: Condition

DTC is set when Powertrain Control Module (PCM) does not detect vehicle speed signal. This is monitored when engine speed is more than 2000 RPM, engine load is more than 40 percent, and transmission is in any position except neutral. This is a continuous monitor. MIL is illuminated when PCM detects malfunction during 2 consecutive drive cycles. Possible causes are:

• PCM malfunction.
• Instrument cluster malfunction.
• Anti-lock Brake System Hydraulic Unit/Control Module (ABS HU/CM) malfunction.
• Open or short circuit between instrument cluster and PCM.
• Vehicle Speed Sensor (VSS) malfunction.
• Open or short circuit between VSS and instrument cluster.