LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2001 >> 626 LX L4-2.0L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Testing and Inspection >> Heated Oxygen Sensor Inspection >> Using the NGS Tester

Using the NGS Tester




1. Connect the SSTs (NGS tester) to the data link connector.
2. Select the "PID/DATA MONITOR AND RECORD" function on the NGS tester display and press TRIGGER.




3. Select "O2S11", and "O2S12" on the NGS tester display and press START. The NGS tester measures and shows the voltage.
4. If not as specified, inspect the following.
- Intake-air system
- Fuel system
- On-board diagnostic system

5. If these Systems are okay, replace the heated oxygen sensor.