LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2000 >> Protege ES L4-1839cc 1.8L DOHC >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil Pack >> Testing and Inspection >> Spark Test

Spark Test

Steps 1 - 5:




1. Disconnect the fuel pump relay connector.
2. Verify that each high-tension lead and connector is connected properly.
3. Inspect the ignition system in the procedure as given in the table.

WARNING: High voltage in the ignition system can cause strong electrical shock which can result in serious Injury. Avoid direct contact to the vehicle body during the spark test.