Diagnosis & Repair Procedure
- Inspect and repair all applicable connections. Inspect condition of battery. Repair as needed. If battery is okay, go to next step.
- Disconnect terminal "B" on generator. Measure voltage between ground and terminal "B". If battery voltage is present, go to next step. If battery voltage is not present, repair circuit between battery and terminal"B" as needed.
- Inspect generator operation, voltage and amperage output. See the GENERATORS & REGULATORS article in the ELECTRICAL section. Repair as needed. If generator is okay, go to next step.
- Erase DTC. See CLEARING CODES . If DTC is present, replace PCM. If DTC is not present, intermittent poor harness connection may have caused DTC to originally set.