DTC P0442 - EVAP System Malfunction, Leak Detected: Condition
DTC is set when PCM detects excessive difference in fuel tank pressures measured immediately after purge control is stopped with Canister Drain Cut Valve (CDCV) closed and preset period of time has elapsed. Possible causes are:
- Purge solenoid malfunction.
- CDCV malfunction.
- Tank Pressure Control Valve (TPCV) malfunction.
- Vent cut valve malfunction.
- Loose fuel filler cap.
- Charcoal canister malfunction.
- Catch tank malfunction.
- Rollover valve malfunction.
- Cracked fuel tank.
- Clogs or leakage in system hoses.
- Fuel level sensor malfunction.
- Fuel tank pressure sensor malfunction.
- Intake Air Temperature (IAT) sensor malfunction.
- Throttle Position (TP) sensor malfunction.
- Mass Air Flow (MAF) sensor malfunction.
- Vehicle Speed Sensor (VSS) malfunction.
NOTE:
New Generation Star (NGS) tester is necessary for following diagnosis and repair procedure.