LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1995 >> Protege L4-1.5L DOHC >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Motor >> Testing and Inspection >> Interlock Switch

Interlock Switch

Refer to the interlock switch wiring diagram, Fig. 25, when testing interlock switch.

Fig. 25 Interlock Switch Wiring Diagram (typical):





1. Disconnect connector and connect ohmmeter to switch.
2. With pedal depressed, continuity should exist between the two terminals. With pedal released, continuity should not exist between the two terminals.
3. If either check is bad, replace switch.