Test No. 4
- Check seat track drive cables for deflection when control switch is operated. If cables deflect, repair or replace seat track. If cables are tight, go to next step.
- Check fuse No. 5 (located in engine compartment fuse/relay box). Replace if necessary. Disconnect motor leads from wiring harness. Check for voltage at harness when control switch is activated. If voltage is present, replace seat track and check operation. If no voltage is present, go to next step.
- Check control switch operation. See CONTROL SWITCH TEST under COMPONENT TESTS. If switch operates normally, go to next step. If control switch does not operate properly, replace control switch and check system operation.
- Check motor for tight ground connections. Tighten as necessary. If ground connections are tight, check for damaged connectors, shorts or opens in wiring circuits and repair as necessary. Check system operation.