LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1991 >> Navajo S, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator - W/Internal Fan >> Bench Testing >> Rectifier Assembly Test

Rectifier Assembly Test

  1. Remove and disassemble alternator. Set ohmmeter in 1-ohm range. Connect one ohmmeter probe to positive diode lead and other probe to heat sink at positive side. Reverse ohmmeter probes. There should be continuity only in one direction. If meter readings are not as specified, replace positive rectifier assembly.
  2. Connect one ohmmeter probe to negative diode lead and other probe to heat sink at negative side. Reverse ohmmeter probes. There should be continuity only in one direction. If meter readings are not as specified, replace negative rectifier assembly.
  3. Check diode trio. There should be continuity in only one direction. Replace if readings are not as specified.