LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1991 >> Navajo S, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Circuit Testing >> Horn Relay Circuit Test

Horn Relay Circuit Test

NOTE: Electrical connectors must remain connected during horn relay testing.
  1. Locate horn relay, behind lower dash panel to the right of steering panel. Check for battery voltage at Yellow/Light Blue wire at horn relay. If battery voltage is not present, check fuse and/or wiring back to fuse panel. If battery voltage is present, go to step 2).
  2. Check for battery voltage at Yellow/Light Green wire at horn relay terminal No. 2, on the socket side of connector. If battery voltage is not present, replace horn relay. If battery voltage is present, press horn button. Voltage should drop to zero volts and horn should sound. If horn does not sound and voltage remains at 12 volts, ground Yellow/Light Green wire.
  3. If horn sounds, replace horn button pad. If horn still does not sound, check for battery voltage on Dark Blue wire when horn button is pressed. If battery voltage is present, repair open between horn and horn relay and ensure horn is operational. If voltage is not present, replace relay.