LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1987 >> 626 L4-1998 cc 2.0L SOHC Turbo FE >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Testing and Inspection >> Inspection of Retard Function

Inspection of Retard Function

Fig. 22 Service connector location, EGI Control Unit:







1. Warm up engine to normal operating temperature.
2. Disconnect service connector to cancel inhibiting signal from EGI control unit Fig. 22.
3. Tap air intake plenum lightly and ensure ignition timing retards.
4. Reconnect service connector and ensure ignition timing does not retard by tapping air intake plenum.