LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1987 >> 626 L4-1998 cc 2.0L SOHC Turbo FE >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Testing and Inspection

Crankshaft Position Sensor: Testing and Inspection

Fig. 7 Number One Cylinder Sensor Inspection:






1. Remove rubber boot from distributor connector.
2. Turn ignition switch to ``On.''
3. Using voltmeter, ensure that there is battery voltage at d terminal (R) Fig. 7..
4. Start engine and increase engine speed.
5. Ensure voltage at terminal D (LgB) is 2-3 volts.