LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1980 >> RX-7 GS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> MITSUBISHI Electronic Ignition Systems - Rotary Engine >> Overhaul >> Reassembly

MITSUBISHI Electronic Ignition Systems - Rotary Engine: Overhaul: Reassembly

Inspect distributor cap and rotor for cracks, carbon tracks, and burned or corroded terminals. Assemble distributor in reverse order of disassembly, noting the following: Install reluctor shaft onto distributor drive shaft, engaging slots of reluctor shaft and governor pins. Install pick-up coil and coil base bearing assembly and tighten attaching screws. Install reluctor on shaft, driving spring pin in with a suitable punch.

Fig 1: Disassembled View of RX7 Distributor
G09344970Courtesy of NOT AVAILABLE