LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1976 >> Cosmo Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Linkage >> Power Steering - Power-Assisted Recirculating Ball >> Removal & Installation >> Power Steering Gear >> Removal

Power Steering Gear: Removal

  1. Disconnect negative battery cable then remove engine oil filter cartridge to gain clearance for removal of the fluid lines. Disconnect and tag pressure and return lines for correct reassembly, then plug both lines and steering gear ports to prevent entry of dirt.
  2. Raise vehicle and disconnect center link at pitman arm, then remove bolts and nuts securing steering gear housing to frame. Remove clamp bolt holding flexible coupling to steering gear, slide gear off coupling and remove steering gear from vehicle.