LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1973 >> 808 Not Available, _NA_, Not Available Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> MAZDA Engines >> Valve Spring Installed Height

Valve Spring Installed Height

  1. If valve seats have been ground or valves refaced, valve stem may protrude too much from top of cylinder head, causing valve spring installed height to be incorrect. With valve pulled fully up into seat, measure distance from spring seat to top of valve stem with a set of Vernier calipers.
  2. Specified distance for intake valves is 1.59" (40.5 mm) and for exhaust valves is 1.48" (37.5 mm). If measurement is 0.020" (0.5 mm) less than specifications, washers of suitable thickness must be installed under valve springs to obtain correct height. If measurement exceeds 0.059" (1.5 mm) less than specification, valve or cylinder head must be replaced.
Fig 1: Checking Valve Spring Installed Height
G09325840Courtesy of MAZDA MOTORS CORP.