Rocker Arm Assembly
- With rocker arm assembly removed and disassembled, inspect all components for wear or damage. The standard clearance between rocker arm bore and shaft is 0.0011 - 0.0032". If measured clearance is beyond 0.004", replace rocker arm or shaft.
- Reassemble and install rocker shaft, noting the following: Intake and exhaust rocker arm shaft supports are interchangeable; intake side uses two rocker shafts; on intake side, longer distances between oil hole and shaft end face each other. Before tightening cylinder head bolts, offset each exhaust rocker arm 0.040" from valve stem center.