LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 1973 >> 808 Not Available, _NA_, Not Available Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> MAZDA Engines >> Piston Pin Replacement

Piston Pin Replacement

  1. Remove piston pin circlips. Using suitable tool (49-0223-061), extract piston pin. If pin is hard to remove heat piston.
  2. Check fit of piston pin in connecting rod bushing. Fit should be 0.0004 - 0.0012". If tolerance is exceeded, replace necessary components.
  3. To replace connecting rod bushing, press out worn bushing and install new one; ensure connecting rod and bushing holes align. Using suitable tool, ream new bushing. Correct fit is hand push, light resistance.
  4. Begin reassembly by replacing piston pin circlip. Place connecting rod in piston so oil hole on connecting rod and piston index mark "F" are in relation (see Figure). Using suitable tool (49-0223-061), seat piston pin. Install second circlip.