DSM Memory Seat
The driver power seat is controlled by the DSM only when the vehicle is equipped with the programmable/recall memory option. The DSM is located under the driver seat. PMI must be carried out when installing a new DSM. Refer to Module Configuration .
This system allows automatic positioning of the driver seat to 2 programmable positions. The personalized memory seat positions are recalled using memory switch buttons 1 and 2 or with the remote entry transmitter. Memory positions can be stored at any time. A memory recall can be initiated with the ignition ON (when the gear selector is in PARK or NEUTRAL) or anytime the ignition is OFF (regardless of gear selector position). For information on programming memory positions or recalling stored memory position, refer to Memory Position Programming .
The memory seat system includes the following serviceable components:
- DSM attached to the seat track
- Memory SET switch attached to the cushion side shield
- Seat control switch attached to the cushion side shield
- Memory seat track assembly (with seat position sensors integral to motors)
- Horizontal motor (part of seat track)
- Front height motor (part of seat track)
- Rear height motor (part of seat track)
- Backrest power recliner motor (with integral position sensor) (part of backrest frame)