LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2009 >> Navigator 4WD V8-5.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Heated Oxygen Sensor (HO2S)

Heated Oxygen Sensor (HO2S)




Heated Oxygen Sensor (HO2S)









Removal

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Disconnect the Heated Oxygen Sensor (HO2S) electrical connector.

3. Using the Exhaust Gas Oxygen Sensor Socket, remove the HO2S.
- Apply penetrating lubricant to the HO2S to assist in removal.





Installation

1. Install the HO2S.
- Apply a light coat of high temperature nickel anti-seize lubricant to the HO2S threads prior to installation.

- Calculate the correct torque wrench setting for the following torque.

- Using the Exhaust Gas Oxygen Sensor Socket, tighten to 46 Nm (34 lb-ft).





2. Connect the HO2S electrical connector.