Pinpoint Test B: The Shift Control Is Out Of Correct Gear Relationship
- B1 CHECK THE SHIFT CONTROL COMPONENTS FOR DAMAGE
- Gain access to the shift control components.
- Key in ACCESSORY position.
- Apply the brake pedal.
- Observe all shift control components while shifting the gearshift lever through all ranges.
- Are any of the components damaged?
- Yes
: REPAIR as necessary. REINSTALL all components. TEST the system for normal operation.
- No
: GO to B2.
- B2 CHECK THE SHIFT CABLE AND BRACKET INSTALLATION
- Check to make sure the shift cable and bracket installation is correct. Refer to SELECTOR LEVER CABLE AND BRACKET .
- Is the shift cable and bracket installed correctly?
- Yes
: GO to B3.
- No
: REINSTALL the shift cable. GO to B3.
- B3 CHECK THE SHIFT CABLE ADJUSTMENT
- Yes
: GO to B4.
- No
: ADJUST the shift cable. GO to B4.
- B4 CHECK THE SELECTOR LEVER INDICATOR ADJUSTMENT
- Yes
: GO to B5.
- No
: ADJUST the selector lever indicator. GO to B5.
- B5 CHECK THE DTR SENSOR ADJUSTMENT
- Check to make sure the digital transmission range sensor adjustment is correct. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION
.
- Is the DTR sensor adjusted correctly?