LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2004 >> Navigator RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Piston - Ring End Gap

Piston - Ring End Gap

CAUTION: Use care when fitting piston rings to avoid possible damage to the piston ring or the cylinder bore.
CAUTION: Piston rings should not be transferred from one piston to another.
NOTE: Cylinder bore must be within specification for taper and out-of-round.
  1. Use a piston without rings to push a piston ring in a cylinder to the bottom of ring travel.
    Fig 1: Identifying Piston Ring End Gap
    G02785593Courtesy of FORD MOTOR CO.
  2. Use a feeler gauge to measure the top piston ring end gap and the second piston ring end gap.
    • Refer to the appropriate article in ENGINES for the procedure.
    Fig 2: Measuring Top Piston Ring End Gap And Second Piston Ring End Gap, Using Use A Feeler Gauge
    G02785594Courtesy of FORD MOTOR CO.