LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2004 >> Navigator RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Piston - Pin to Bore Diameter

Piston - Pin to Bore Diameter

    WARNING: Cover the end of the pin bore with a hand or shop rag when removing the retainer ring, since it has a tendency to spring out. Wear eye protection.
    NOTE: Piston and piston pins are a matched set and should not be interchanged.
    Fig 1: Identifying Piton Pin Bore Diameter
    G02785588Courtesy of FORD MOTOR CO.
    Fig 2: Identifying Directions For Measuring Piton Pin Bore Diameter
    G02785589Courtesy of FORD MOTOR CO.
  1. Measure the piston pin bore diameter in two directions on each side. Verify the diameter is within specification.
    • If out of specification, install new components as necessary. Refer to the appropriate article in ENGINES for the procedure.