LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2004 >> Navigator RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Cylinder Bore - Taper

Cylinder Bore - Taper

  1. Measure the cylinder bore at the top, middle, and bottom of piston ring travel in two directions as indicated. Verify the cylinder bore is within the wear limit. The difference indicates the cylinder bore taper. Bore the cylinder to the next oversize.
    • Refer to the appropriate article in ENGINES for the procedure.
    Fig 1: Identifying Measuring Points And Directions Of Cylinder Bore - Taper
    G02785583Courtesy of FORD MOTOR CO.