LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2004 >> Navigator RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Connecting Rod - Bearing Journal Clearance

Connecting Rod - Bearing Journal Clearance

Fig 1: Special Tool Chart
G02785604Courtesy of FORD MOTOR CO.
NOTE: The crankshaft connecting rod journals must be within specifications to check the connecting rod bearing journal clearance.
  1. Remove the connecting rod bearing cap.
  2. Position a piece of Plastigage across the bearing surface.
    Fig 2: Installing A Piece Of Plastigage Across Bearing Surface
    G02785605Courtesy of FORD MOTOR CO.
  3. NOTE: Do not turn the crankshaft during this step.
  4. Install and tighten to specifications, then remove the connecting rod bearing cap.
  5. Measure the Plastigage to get the connecting rod bearing journal clearance. The Plastigage should be smooth and flat. A changing width indicates a tapered or damaged connecting rod or connecting rod bearing.
    • Refer to the appropriate article in ENGINES for the procedure.
    • If out of specification, install new components as necessary. Refer to the appropriate article in ENGINES for the procedure.
    Fig 3: Measuring Plastigage To Get Connecting Rod Bearing Journal Clearance
    G02785606Courtesy of FORD MOTOR CO.