- The power seat is inoperative - passenger
|
- Fuse.
- Circuitry.
- Seat control switch (14A701).
|
|
- The power seat moves but is noisy
|
- Seat tracks.
- Power seat motors.
|
|
- The power seat moves but is loose
|
- Fastening hardware.
- Seat tracks.
- Power seat motors.
|
|
- The power seat does not make full travel
|
- Track obstruction.
- Seat tracks.
- Power seat motors.
|
|
- The power seat does not move horizontally/vertically - passenger
|
- Circuitry.
- Seat control switch.
- Seat tracks.
- Power seat motors.
|
|
- The memory seat is inoperative
|
- Fuse.
- Circuitry.
- Seat control switch.
- Seat track.
- DSM.
- Power seat motor.
|
|
- The memory seat does not operate correctly - does not operate using the memory set switch
|
- Circuitry.
- Memory set switch.
- Position sensor.
- DSM.
|
|
- The memory seat does not operate correctly - does not operate using the remote transmitter
|
- Circuitry.
- DSM.
- Keyless entry transmitter.
- Central security module.
|
|
- No communication with the module - DSM
|
|
|
- No communication with the module - unable to carry out on-demand self-test with the DSM
|
|
|
- The power lumbar is inoperative
|
- Circuitry.
- Seat control switch.
- Power lumbar motor assembly.
|
|
- All climate controlled seats are inoperative
|
- CJB Fuse F1118 (30A).
- Circuitry.
|
- DEPOWER the supplemental restraint system (SRS). REFER to AIR BAG RESTRAINT SYSTEMS
.
DISCONNECT driver seat C327 or passenger seat C315 of the affected seat and CONNECT restraint system diagnostic tool 501-095 to the affected seat connector. CONNECT the battery ground cable. CHECK driver CCSM C3031b-4 (or passenger CCSM 3036b-4), circuit 1566 (RD/YE) for battery voltage. If OK, REPAIR ground to driver CCSM C3031b-3 (or passenger CCM 3036b), circuit 1205 (BK). Once the repair is complete, DISCONNECT the restraint system diagnostic tool from the seat connector and CONNECT the seat connector of the affected seat. REPOWER the SRS. REFER to AIR BAG RESTRAINT SYSTEMS
.
|
- A single climate controlled seat is inoperative/does not operate correctly
|
- Circuitry.
- Climate controlled seat ducts.
- Climate controlled seat switch.
- Seat fan motor.
- Seat cushion TED.
- Seat backrest TED.
- CCSM.
|
|
- No communication with the driver CCSM
|
|
- DEPOWER the supplemental restraint system (SRS). REFER to AIR BAG RESTRAINT SYSTEMS
.
DISCONNECT driver seat C327 or passenger seat C315 of the affected seat and CONNECT restraint system diagnostic tool 501-095 to the affected seat connector. CONNECT the battery ground cable. CHECK driver CCSM C3031b-2 (or passenger CCSM 3036b-2), circuit 1003 (GY/YE) for ignition voltage and driver CCSM C3031b-3 (or passenger C3036b-3), circuit 1205 (BK) for ground. REPAIR as needed. If OK. REFER to GENERATORS & REGULATORS
.
Once the repair is complete, DISCONNECT the restraint system diagnostic tool from the seat side air bag module body harness connector and CONNECT the seat side air bag module connector of the affected seat. REPOWER the SRS. REFER to AIR BAG RESTRAINT SYSTEMS
.
|