LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2003 >> Aviator AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Removal And Installation >> Water Pump

Water Pump

Fig 1: Material
G01634690Courtesy of FORD MOTOR CO.
  1. Drain the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
  2. Remove the cooling fan. For additional information, refer to COOLING FAN .
  3. Remove the upper fan shroud. For additional information, refer to RADIATOR, COOLING FAN AND SHROUD, AND DEGAS BOTTLE .
  4. Remove the accessory drive belt. For additional information, refer to ENGINE .
  5. Remove the components in the order indicated in the following illustration.
  6. To install, reverse the removal procedure.
    Fig 2: Removal Sequence Of Water Pump
    G01634691Courtesy of FORD MOTOR CO.
  7. Fill and bleed the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .

Item 5: Water Pump O-Ring Installation Note 

    CAUTION: Do not rotate the water pump housing once installed in the engine. Damage to the O-ring seal can occur, causing the water pump to leak.
  1. Install a new O-ring seal and lubricate with clean engine coolant before installing the pump.