Piston - Ring End Gap
CAUTION:
Use care when fitting piston rings to avoid possible damage to the piston ring or the cylinder bore.
CAUTION:
Piston rings should not be transferred from one piston to another.
NOTE:
Cylinder bore must be within specification for taper and out-of-round.
- Use a piston without rings to push a piston ring in a cylinder to the bottom of ring travel.
- Use a feeler gauge to measure the top piston ring end gap and the second piston ring end gap.
- For the procedure, refer to ENGINE - 4.6L AND 5.4L (2V) for Expedition or ENGINE 5.4L (4V) for Navigator.