Removal and Installation
- Remove the rear passenger seat. For additional information, refer to Rear Seat
.
- Disconnect the rear anti-lock brake sensor connector.
Courtesy of FORD MOTOR CO.
- Raise and support the vehicle. For additional information, refer to JACKING & HOISTING
.
- Remove the harness from the clips.
Courtesy of FORD MOTOR CO.
- Remove the rear anti-lock brake sensor (2C190).
- Remove the sensor bolt.
- Remove the rear anti-lock brake sensor.
Courtesy of FORD MOTOR CO.
- To install, reverse the removal procedure.
Courtesy of FORD MOTOR CO.